Username:  Password: 
揭牌
Position : Home > Products > BISPLATE 500 BISPLATE 500
BISPLATE 500
 
BISPLATE 500 is a through hardened, abrasion resistant steel plate, offering long life expectancy in sliding and gouging abrasion applications.
 
APPLICATIONS

BISPLATE 500 is the hardest steel produced by Bisalloy Steels and offers exceptionally long life in sliding abrasion applications such as:
  • Dump truck wear liners
  • Chutes
  • Wear liners
  •  Earthmoving buckets
  •  Cutting edges
  • Ground engaging tools 
FABRICATION
    BISPLATE 500 is a medium carbon, high hardness, abrasion resistant steel. With appropriate attention to heat input, preheat and consumable selections, BISPLATE 500 can be successfully welded to itself and a range to other steels by conventional techniques. Because of its high hardness, cold forming of BISPLATE 500 is difficult, requires higher bending and forming forces and greater allowances must be made for springback. If heating is necessary, this should not exceed 200℃, otherwise mechanical properties might be affected.
 
MECHANICAL PROPERTIES
 
PROPERTIES
 
SPECIFICATION
 
TYPICAL
 
0.2% Proof Stress
-
1400MPa
Tensile Strength
-
1640Mpa
Elongation in 50mm G.L.
-
10%
Charpy Impact(Longitudinal)
+20℃(10mm×10mm)
-
35J
Hardness
477-534HB
500HB
 
CHEMICAL COMPOSITION
 
THICKNESS
(mm)
 
 
C
P
Mn
Si
S
Ni
Cr
Mo
B
CE (ⅡW)
CET
8-100
Max.
0.32
0.025
0.40
0.35
0.005
0.35
1.20
0.30
0.002
0.62
0.40
 
Products


Friend Links:贝斯 山东钢铁 贝斯济钢新浪微博

Adress:21# North Road Of Industy JiNan City ShanDong Province Tel:+86-531-88845057 Fax:+86-531-88845057 Mail:bisjigang@bisjigang.com
Copyright 2012 Bisalloy Ji gang Limited Liability Company All Right Reserved. | 鲁ICP备11036060号-1

技术支持:麦谷网络 网站建设 网站制作